Eastern Reliability

Vertical Storage Tanks

Rotationally molded tanks from your choice of virgin high density crosslink or FDA-compliant linear polyethylene. Either is more corrosion and chemical resistant than fiberglass, stainless or mild steel. Tanks are semi-translucent, one-piece seamless molded units with gallon mark-ers and access openings molded-in.

Wall thickness conforms to ASTM D-1998 standards for liquid storage. Narrow diameters for space-saving in-plant use. They possess excellent low temperature impact resistance and are UV. stabilized. Available in natural color or optional blue, green, red, yellow or black. Can be equipped with accessories to fit your needs.

Model Number Capacity (US Gallons) Dimensions (inches) Weight (lbs) Linear and Crosslink Polyethylene Access Opening (inches)
Diameter Height 1.35 Sp. Gravity 1.5 Sp. Gravity 1.9 Sp. Gravity 2.2 Sp. Gravity
ICT40 40 20 38 N/A N/A 20 N/A 16
ICT60 60 23 42 N/A N/A 28 N/A 16
ICT65 65 23 44 N/A N/A 28 N/A 7
ICT 80 80 24 49 N/A N/A 30 N/A 16
ICT 120 120 29 52 N/A N/A 50 N/A 7
ICT 140 140 29 58 N/A N/A 50 N/A 16
ICT 175 175 35 51 N/A N/A 56 N/A 16
ICT 200 (35") 200 35 57 N/A N/A 64 N/A 16
ICT 200 (36") 200 36 53 N/A N/A 60 N/A 16
ICT 250 250 35 69 N/A N/A 75 N/A 16
ICT 300 300 35 82 N/A N/A 85 115 16
ICT 400 400 48 63 N/A N/A 99 120 16
ACT 550 550 69 43 N/A N/A 120 120 16
ICT 550 550 48 82 N/A 130 130 160 16
IFT 550 550 48 83 N/A 130 130 160 11
ICT 625 625 48 93 N/A N/A 140 175 16
ICT 700 700 69 58 N/A 130 150 175 16
ICT 850 850 48 120 166 180 230 267 16
IFT 950 950 64 83 171 190 205 240 11
ICT 1000 1000 64 84 171 190 205 240 16
ICT 1100 1100 86 55 171 190 220 260 16
ICT 1200 1200 64 100 203 260 330 350 16
ACT 1500 1500 86 74 227 250 320 420 16
ICT 1500 1500 64 121 295 320 415 480 16
ICT 1850 1850 96 78 335 350 400 605 16
ICT 2000 2000 86 100 335 375 430 665 16
ICT 2050 2050 64 165 450 500 620 800 16
ICT 2400 2400 96 95 412 450 620 800 16
ICT 2500 2500 86 119 441 450 620 808 16
ICT 2900 2900 96 111 568 620 800 990 16
ICT 3000 3000 90 122 568 620 800 1035 16
ICT 4000 4000 90 162 782 850 1100 1620 16
ICT 4100 4100 119 108 782 850 1100 1400 24*
ICT 4200 4200 96 152 782 850 1100 1620 16
ICT 5200 5200 105 160 1101 1200 1550 1895 24*
ICT 5500 5500 119 141 1215 1350 1600 2200 24*
ICT 5600 5600 96 196 1350 1500 1750 2600 24*
ICT 6500 6500 105 193 1776 1900 2500 2850 24*
ICT 6510 6510 119 163 1575 1750 2000 2450 24*
ICT 7300 7300 119 177 2028 2244 2866 3299 24*
ICT 8000 8000 143 142 1989 2200 2800 3250 24*
ICT 8410 8400 119 201 2758 3065 3882 4495 24*
ICT 10000 10000 143 173 2700 3000 3400 4770 24*
ICT 12000 12000 143 196 3400 3800 4400 5340 24*

Molded In Full Drain Outlet - Patent Pending

Assmann Corporation of America offers an FDO (Full Drain Outlet) outlet assembly. This outlet provides the ability to fully drain your tank without the need for mechanically installed nozzles. The full drain assembly should be utilized where heavy solids or saltscan accumulate in the bottom of the tank thus creating difficult maintenance work. This assembly virtually eliminates the need for confined space entry

The assembly utilizes a metallic molded in insert. This insert is available in 316 Stainless steel, Titanium and Hastelloy C-276. These material variations allow us to store virtually any chemical in our tank.

Also unique about the FDO assembly is the fully re-placeable polyethylene flange adapter. The adapter can be removed so that the tank can be installed on a flat surface without concrete pad. This also provides the ability to replace the flange in the event of chemical or mechanical damage without having to replace the entire vessel

Assmann’s Full Drain Outlet connection is available in two configurations providing the ability to configure the tank for ease installation and lower maintenance costs.

FDO Complete: This complete assembly comes with the “molded-in” full drain connection, polyethylene flange adapter, butterfly valve and flexible expansion joint. This assembly will be ready for installation.

Molded in Full Drain Outlet

Molded In Full Drain Outlet - Patent Pending

Assmann Corporation now molds modular polyethylene tank stands. These stands are seismic and wind load rated plus easily disassemble, allowing the tank to be relocated to a different site. Stand elevates the polyethylene tank 12” from grade, providing the ability to fully drain the tank without the installation of expensive concrete pads. 100% chemical resistant and suitable for all corrosive environments.

Assmann tested this stand to over 300,000 lbs. of crush force.

Modular Polyethylene Tank Stand Assembly
Modular Polyethylene Tank Stand
Modular Polyethylene Tank Stand Application